200A Analog Battery Load Tester | 6V 12V Lead-Acid Battery Tester

200A Analog Battery Load Tester — Professional 6V/12V Battery Analyzer

When you need to know the true condition of a battery — not just its resting voltage — the Platrex 200A Analog Battery Load Tester delivers. With a powerful 200A load capacity and a large color-coded analog dial, this tester simulates real-world starting conditions to give you an honest, accurate picture of battery health in seconds. Trusted by workshops, fleet operators, and serious DIY mechanics worldwide.

Key Features

• 200A Load Capacity: High-current load test simulates actual engine cranking conditions for accurate battery health diagnosis
• Color-Coded Analog Dial: Large meter with Red / Yellow / Green zones — instantly shows if battery is Bad, Weak, or Good
• 3-Color Status Zones:
  • Red: Battery may be defective or run down
  • Yellow: Battery may be defective or not fully charged
  • Green: Battery capacity is good
• Dual Voltage Support: Compatible with both 6V and 12V lead-acid batteries
• Safety-First Design: Enamel housing and internal switch gear prevent sparking and electric shock
• Heavy-Duty Copper Clamps: Gold-plated copper clamps with insulated handles for safe, no-spark connection
• Integrated Handle & Clamp Holder: Ergonomic carry handle with built-in clamp storage for easy portability
• Ventilated Steel Housing: Honeycomb panel design dissipates heat during sustained load testing
• Load Switch: Red rocker switch for controlled 10-second load test activation

Specifications

• Test Voltage: 6V / 12V
• Max Load: 200 Amps
• Display: Analog dial (color-coded: Red / Yellow / Green)
• Housing: Enamel-coated ventilated steel
• Clamps: Gold-plated copper, heavy-duty insulated
• Cable: Flexible heavy-gauge copper wire
• Compatible Battery Types: Lead-acid (standard, AGM, gel)

How to Use

1. Connect clamps to battery terminals — red clamp to positive (+), black clamp to negative (−)
2. Read the open-circuit voltage on the analog dial (load switch OFF)
3. Press and hold the LOAD switch for up to 10 seconds
4. Observe the needle position: Green = Good, Yellow = Weak/Recharge, Red = Replace
5. Release the switch and disconnect clamps safely

Safety Notes

• Do not hold the load switch for more than 15 seconds continuously
• Ensure clamps are firmly connected before activating the load switch
• Keep away from flammable gases during testing

Applications

Ideal for cars, vans, RVs, trucks, and farm vehicles. Suitable for automotive workshops, car dealerships, fleet maintenance centers, and professional mechanics. Compatible with all standard 6V and 12V lead-acid batteries.